Quality beyond compare,
Amenities you never expected.
Features
Avalon
"L" series models feature all of the following as STANDARD
equipment - all the time
-
Garmin
in Dash Color GPS with fishfinder, GPS speedometer and water temp.
-
Clarion
CD Stereo with 4 high power speakers
-
MP3
input Jack
-
Hydraulic
Steering
-
Deluxe
Helmstand featuring an Automotive style, vinyl wrapped, wood grain
dash, drop in cooler, Gauge package, lighted toggle switches, and
quick release windshield
-
Polished
Aluminum Tilt Steering wheel
-
Plush
Reclining drivers chair with slide and swivel adjustment
-
Wine
rack with 4 glasses and carafe
-
Plush
embroidered furnishings made with Avalon's EASY TO
CLEAN, MILDEW RESISTANT, puncture resistant, 50 gauge thickness EXCLUSIVE Matrix
50 vinyl.
-
Stainless
Steel cup holders
-
28
oz designer Hi Lo carpet
-
Full
Color matched Mooring Cover
-
Color
Matched 10' Bimini top with Heavy Duty 1 1/4" framing, light, and
quick release brackets.
-
Built
in Halogen docking lights
-
Stainless
Steel Boarding Ladder
-
Ergonomic
table with locking table bases in fore and aft areas.
-
36
Gallon fuel system
Construction
- Pdf with Pics.
The
construction begins with heavy duty 25" diameter first quality
Aluminum pontoons. These pontoons do not require acid dipping to give them
a consistent finish, they are of a consistent finish right from the start.
All "L" series pontoons feature our EXCLUSIVE side keel
protection and Integrated nose cone fins. Also EXCLUSIVE are our
double full riser connections. These solid pieces of heavy duty extruded
aluminum run the full length of the pontoon on the inside and outside
providing the strongest connection from pontoon to deck. Our EXCLUSIVE
motor pod is engineered for today's heavy 4 stroke motors. It is
stronger, thicker and double connected with 16 stainless
steel 3/8" bolts. Check that against any brand!
Avalon
"L" series models are built with 3" high .188 thickness
"C" channel crossbeams that are bolted again with stainless
steel 3/8" bolts to the double riser systems. Our
3/4" marine decking is then Bolted to the crossbeams with
stainless steel bolts, and locknuts. This crossbeam and deck construction
is used only in the highest quality Top end models. Many competitors build
what they call "Top end" models using 2" .125
thickness hat, "Z", or "C" channels that require
extra crossbeams for support. They then tech screw the deck to the
crossbeam. Although this type of construction is used on many less
expensive pontoon boats, it is not the level of heavy duty construction
expected for a top end model. Our pontoon and crossbeam construction, and
decking, carry a Limited lifetime warranty* The entire setup is then
framed with heavy duty .090 anodized rub rail with a heavy duty rubber
bumper (black so it doesn't show scuffing) insert, and then finished off
with the heaviest EXCLUSIVE polished stainless steel corners on ALL
4 corners.
Inside,
Avalon models feature the industry's only EXCLUSIVE Aluminum
seat base frames. These lifetime guaranteed* compartments feature the
largest storage capacity and the only flow through
ventilation available. Even when the compartment is closed and the
cover is on, items under the seat bases are receiving airflow to dry the
area and to help prevent mold and mildew
Safety
Avalon
"L" series feature the tallest heaviest anodized wall railings
to keep people more secure. Finger guards are provided at all gate
openings. Trip hazards are eliminated by providing recessed pop up
cleats, Docklights built into the walls, and no rail across the front
deck. Our nose cone fins are trimmed to reduce rough edges.
* see full warranty for details
